User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 46 of 104 ProSoft Technology, Inc.
March 10, 2010
Field AT Command Description
Keepalive IP
Address
*IPPINGADDR
The IP address that the RLXIC-EV will ping to determine if
there is internet connectivity and make sure this IP address
is accessible.
Set the IP address or valid internet domain name for the
RLXIC-EV to ping to keep itself alive (online). *IPPING
must to be set to a value other than 0 to enable pinging.
 d.d.d.d=IP address
 name=domain name
*IPPINGADDR sets the IP address you want to use for the
connection test.
If *IPPINGADDR is left blank or is set to an invalid IP
address (example, an IP which is unreachable or one
which is not a valid IP address), device performance will be
adversely affected.
Keepalive Ping
Time
*IPPING The amount of time between pings when the device is idle.
Set the period to ping (if no valid packets have been
received) a specified address (*IPPINGADDR) to keep the
device alive (online).
 Disable pinging (default)
 5-255 minutes
15 minutes is the minimum interval that can be set for
Keepalive. If you set *IPPING for a value between 0 and
15, the minimum value of 15 will be set.
*IPPING sets the interval, in minutes, you want Keepalive
to test the network connection. To disable Keepalive, set
*IPPING to 0 (default setting).
15 to 60 minutes is the minimum time that can be set for
Keepalive. If you set *IPPING for a value less than the
minimum, the minimum value will be set.
Force Keepalive
ping
*IPPINGFORCE If the ping should occur even if the device is not idle.