User manual

RLXIC-EV ♦ Intelligent Cellular Configuring your RLXIC-EV
RadioLinx® Intelligent Cellular Ethernet Gateway for Verizon User Manual
Page 36 of 104 ProSoft Technology, Inc.
March 10, 2010
5.5.1 Home
The home section of the status tab is the first page displayed when you log in to
ACEmanager. It shows basic information about the cellular network connection
and important information about the device you would most likely want to see
first.
Tip: Refer to the "WAN / Cellular" section of this guide for information about configuring the cellular
device.
Field AT Command Description
Phone Number *NETPHONE
The phone number (programmed into the device) is part of
carrier account.
IP Address *NETIP
The current IP address of the device reported by the
internal module, generally obtained from your carrier. This
is the address you can contact the RLXIC-EV from the
Internet if you have a mobile terminated or Internet
accessible account.
Note: If there is no current network IP address, 0.0.0.0
may be displayed.
Tip: Use *NETALLOWZEROIP if you need to allow the
display of an IP ending in a zero.