User manual

SNMP : Simple Network Management Protocol RLXIC-EH ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc. Page 69 of 111
May 29, 2009
To change the password in the RLXIC-EH, select Modem from the top menu line
in AceManager.
The current password will be pre-entered. As you type the new password and
confirm it, the characters you type will be obscured by "x". For the password, you
can use numbers, letters, and/or punctuation.
Caution: The password is case sensitive. "drowssaP" is not the same as "drowssap".
9.2.4 Trap Destination
*SNMPTRAPDEST needs to be set with the destination IP and port. If either are
set to zero or empty, SNMP traps are disabled.
Note: Traps are sent out according to the SNMP security level (that is, if the security level is 2,
traps will be authenticated and encrypted). Currently, the only trap supported is LinkUp.
9.2.5 Community String
The community string can be configured using *SNMPCOMMUNITY. The default
is "public".