User manual

Configuring your RLXIC-EH RLXIC-EH ♦ Intelligent Cellular
User Manual RadioLinx Intelligent Cellular Ethernet Gateway for HSUPA (3G GSM) Networks
ProSoft Technology, Inc. Page 35 of 111
May 29, 2009
Note: You can also connect using the virtual USB serial port. Refer to Using the USB virtual serial
port with a Terminal Emulation Utility (page 46) for more information on configuring and using the
virtual serial port.
2 Type in 192.169.13.31 for Host Address.
3 Change the "Port Number" to
2332.
4 Click OK.
Connected
1 Type
AT and press ENTER. You should get a reply of "OK" or "0".
2 To see what you are typing as you type it, you will need to turn on the echo
and verbose mode. Type
ATE1V1 and press ENTER.
3 If you get a reply of "
OK", then you entered the command successfully. If you
get a reply of "
0" or "ERROR", try entering the command again.