Specifications

Rockwell Automation Publication AG-SG001G-EN-P - April 2015 37
Choosing a Telemetry Network Chapter 2
Table 2 - Protocols Available from Third-party Suppliers
Protocol Allen-Bradley form
factor
Installation
Master Slave
Allen-Bradley DF1 half-
duplex
AMOCAMS 500
BIF (BRITE)
Caterpillar Gas and Diesel
Engine
Caterpillar Digital
Voltage Regulator
Controlotron
Danload 6000
Data Aire
Dynalco TM5000 and
TEC9000
GE SNP
HSQ
Leeds & Northrup Conitel
C2020
Liebert
Modbus ASCII and RTU
Omron Host Link
Power Measurements Ltd.
ACM3720
Quantum
Reliance Single and
Multiple Processor
SquareD Sy/Max
Sullair Supervisor II and
IE
Sutron
Tejas 3 and 5
Teledyne Control
Applications
Toshiba PLC
TRW S70
Allen-Bradley DF1 half-
duplex
BIF (BRITE)
CDC Type II
Colonial Pipeline DLE
Conitel 2020
ENRON
Johnson Controls Metasys
N2
Modbus ASCII and RTU
SCI CSNET
Square D Sy/Max
Tejas 3 and 5
Teledyne CA
Tennessee Gas
1746 I/O chassis slot
DIN rail mount
Install the MARC module into a 1746 I/O
chassis and connect via an RS-232 cable to the
SLC (powered off of chassis backplane). DIN
rail mount Omnii-Comm connects via RS-232 or
Ethernet network to processor (powered off of
external 24V dc).
Allen-Bradley DF1 half-
duplex
DNP 3.0
E
merson FX Drive
Fisher ROC
Honeywell 7800 Burner
Control
IEC 60870-5-101/103
Limitorque Valves
MDA Scientific CM4
MDA Scientific System
16
MetOne PCX
Modbus ASCII and RTU
MTS Level Plus
SEAbus
York Chiller XTACK
DNP 3.0
Fisher ROC
Foxboro/Systronics
Minimote RTU
IEC 60870-5-101/103
Harris 5000/6000
Landis & Gyr 8979F
Metasys N2
Modbus ASCII and RTU
Systronics (VSAT
supported)
Teledyne CA
1746 I/O chassis slot
1756 I/O chassis slot
1794 Flex I/O
DIN rail mount
Install the ProSoft module into the chassis
(where communication with the processor takes
place across the chassis backplane) or install a
DIN rail mount ProLinx Gateway, which
connects via an RS-232 cable to the processor.