Setup guide

Before You Begin RLXIB-IHA ♦ 802.11a
Setup Guide RadioLinx® 802.11a Industrial Hotspot
ProSoft Technology, Inc. Page 9 of 19
October 19, 2009
2 Click to start R
ADIOLINX IH BROWSER.
The window lists all the radios your computer can access. The MAC ID number is
essentially the serial number of the radio; this number is also printed on the side
of the radio. If a radio listing does not appear in the window, select Scan from the
File menu. If you still do not see a radio listing, see Troubleshooting.
1.3 Plug In the Cables
You can configure the RLXIB-IHA using the Ethernet port on the radio. On the
underside are three ports; Ethernet, Serial and Power (10 to 24 VDC 6 W).
From left to right: Power connector, Serial port and Ethernet port.
Use the Ethernet cable to configure the radio for the first time.