Setup guide

RLXIB-IHA ♦ 802.11a Verify Communication
RadioLinx® 802.11a Industrial Hotspot Setup Guide
Page 16 of 19 ProSoft Technology, Inc.
October 19, 2009
3 Verify Communication
When configured, the name of each radio is preceded by an M (for Master), an R
(for Repeater), or a C (for Client) in the IH Browser window.
Look at the LEDs to ensure good link quality, as explained in LED display (page
17). After a repeater is configured, you can unplug the Ethernet cable from it.