Setup guide

Adding and Configuring Additional Radios RLXIB-IHA ♦ 802.11a
Setup Guide RadioLinx® 802.11a Industrial Hotspot
ProSoft Technology, Inc. Page 15 of 19
October 19, 2009
2 Adding and Configuring Additional Radios
At this point you should attach and configure any additional IHA radios you will
be using. Ensure that any new radios use a unique name, but the same Network
SSID as your master. The only difference in procedure will be in setting up each
additional radio. Instead of setting your additional radios as Masters, they should
be set as Repeaters or, more rarely, Clients, depending on their intended
purpose.