User guide

RLX-IH ♦ 802.11b Start Here
Industrial Hotspot
Page 16 of 99 ProSoft Technology, Inc.
April 10, 2007
Note: The master is the "root" or top-level radio in a network. You must have
at least one master radio per network. For redundancy, you can assign more
than one master to a network.
To configure a Master radio, make the following changes to the web
configuration form:
¾ Radio Network Settings
 Radio Name: Enter a unique name for the radio.
 Select Master as the radio mode.
 Network SSID: Assign a network name (SSID) of up to 32 characters. The
radio uses this name in all network references. All radios in a network must
have the same SSID.
 Channel: Select a channel for the network or accept the default value.
Network channels allow radios to avoid sharing a frequency with other
networks in the same location.