User manual
Table Of Contents
- Start Here
- Configuring the Processor with Concept
- Configuring the Processor with ProWORX
- Configuring the Processor with UnityPro XL
- To build (compile) the project:
- To verify address and driver settings in UnityPro XL:
- Setting Up the ProTalk Module
- Configuring the Module
- Diagnostics and Troubleshooting
- Reading Status Data From the Module
- The Configuration/Debug Menu
- Required Hardware
- Required Software
- Using the Configuration/Debug Port
- Main Menu
- Opening the Data Analyzer Menu
- Viewing Block Transfer Statistics
- Viewing Module Configuration
- Opening the Database Menu
- Opening the Backplane Menu
- Transferring the Configuration File from PC to PTQ module
- Transferring the Configuration File from PTQ module to PC
- Viewing Version Information
- Warm Booting the Module
- Viewing Port Communication Status
- Viewing Port Configuration
- Exiting the Program
- Database View Menu
- Viewing Register Pages
- Displaying the Current Page of Registers Again
- Moving Back Through 5 Pages of Registers
- Viewing the Previous 100 Registers of Data
- Skipping 500 Registers of Data
- Viewing the Next 100 Registers of Data
- Viewing Data in Decimal Format
- Viewing Data in Hexadecimal Format
- Viewing Data in Floating Point Format
- Viewing Data in ASCII (Text) Format
- Returning to the Main Menu
- Backplane Menu
- Data Analyzer
- Data Analyzer Tips
- LED Status Indicators
- Reading Status Data From the Module
- Reference
- Index
PTQ-LNG ♦ Quantum / Unity Platform Reference
Landis & Gyr Telegyr Interface Module
Page 88 of 103 ProSoft Technology, Inc.
May 29, 2007
Register Content Description
6014
Number of responses - Port
2
Contains the total number of messages sent out of
the port.
6015
Number of errors sent - Port
2
Contains the total number of message errors sent out
the port.
6016
Number of errors received -
Port 2
Contains the total number of message errors received
on the port.
6017 Backplane Transfer Writes
Contains the total number of write blocks transferred
from the processor to the module.
6018 Backplane Transfer Reads
Contains the total number of read blocks transferred
from the module to the processor.
6019 N/A
6020 N/A
6021 N/A
6022 Backplane Transfer Errors
Contains the total number of block errors recognized
by the module.
6023 Current Error - Port 1
For a slave port, this field contains the value of the
current error code returned. For a master port, this
field contains the index of the currently executing
command.
6024 Last Error - Port 1
For a slave port, this field contains the value of the
last error code returned. For a master port, this field
contains the index of the command with the error.
6025 Current Error - Port 2
For a slave port, this field contains the value of the
current error code returned. For a master port, this
field contains the index of the current executing
command.
6026 Last Error - Port 2
For a slave port, this field contains the value of the
last error code returned. For a master port, this field
contains the index of the command with an error.
A data file should be allocated in the ladder logic to hold this block of data. The
size of the block of data is 33 words..
8.5 PTQ-LNG Command Descriptions
The following table provides information on supported commands.
Command Command Description
Analog Change Report - 0
This command is implemented in the module per the
protocol specification. Up to 300 analog values are
supported by the module.
Analog Force Report - 1
This command is implemented in the module per the
protocol specification. Up to 300 analog values are
supported by the module.
Analog Group Change Report - 2
This command is implemented in the module per the
protocol specification. Up to 300 analog values are
supported by the module.
Analog Group Force Report - 3
This command is implemented in the module per the
protocol specification. Up to 300 analog values are
supported by the module.