User manual

PTQ-LNG ♦ Quantum / Unity Platform Configuring the Processor with UnityPro XL
Landis & Gyr Telegyr Interface Module
Page 32 of 103 ProSoft Technology, Inc.
May 29, 2007
2 Next, enter the module personality value. The correct value for ProTalk
modules is 1060 decimal (0424 hex).
3 Before you can save the project in UnityProXL, you must validate the
modifications. Open the Edit menu, and then choose Validate. If no errors are
reported, you can save the project.
4 Save the project.
4.3 Build the Project
Whenever you update the configuration of your PTQ module or the processor,
you must import the changed configuration from the module, and then build
(compile) the project before downloading it to the processor.
Note: The following steps show you how to build the project in Unity Pro XL.
This is not intended to provide detailed information on using Unity Pro XL, or
debugging your programs. Refer to the documentation for your processor and
for Unity Pro XL for specialized information.
¾ To build (compile) the project:
1 Review the elements of the project in the Project Browser.
2 When you are satisfied that you are ready to download the project, open the
Build menu, and then choose Rebuild All Project. This action builds
(compiles) the project into a form that the processor can use to execute the
instructions in the project file. This task may take several minutes, depending
on the complexity of the project and the resources available on your PC.