User manual

PTQ-LNG ♦ Quantum / Unity Platform Index
Landis & Gyr Telegyr Interface Module
Page 102 of 103 ProSoft Technology, Inc.
May 29, 2007
K
Keystrokes • 66
L
LED Status Indicators • 79
LNG Message Format • 91
M
Main Logic Loop • 84
Main Menu • 68
Master CRC • 92
Master Data Block • 92
Master Message Header • 91
Minimum Command Delay • 54
Module Control Blocks • 86
Module Name Parameter • 50
Module Power Up • 84
Module Type Parameter • 50
Moving Back Through 5 Pages of Registers •
72
N
Navigation • 65
O
Obtain the Sample Configuration Files • 48
Opening the Backplane Menu • 69
Opening the Data Analyzer Menu • 68
Opening the Database Menu • 69
P
Parity • 53
PC and PC Software • 6
Please Read This Notice • 2
Product Specifications • 81
ProTalk Module Carton Contents • 5
PTQ-LNG Command Descriptions • 88
PTQ-LNG Database Map • 85
PTQ-LNG Functionality Overview • 83
PTQ-LNG Status Data Definition • 80, 87
Q
Quantum / Unity Hardware • 6
R
Read Register Count • 50
Read Register Start • 50
Reading Status Data From the Module • 65
Redisplaying the Menu • 73
Reference • 81
Removing Timing Marks in the Data
Analyzer • 75
Required Hardware • 58, 66
Required Software • 59, 66
Returning to the Main Menu • 73, 77
RS-232 • 40
RS-232 -- Modem Connection • 41
RS-232 -- Null Modem Connection
(Hardware Handshaking) • 41
RS-232 -- Null Modem Connection (No
Hardware Handshaking) • 42
RS-232 Configuration/Debug Port • 40
RS-422 • 43
RS-485 • 42
RS-485 and RS-422 Tip • 43
RTS Off • 54
RTS On • 54
RTU CRC • 94
RTU Data Block • 93
RTU Message Header • 93
S
SBO Time Select • 53
SBO Timer Base • 52
Set up Data Memory in Project • 15
Setting Up the ProTalk Module • 37
Skipping 500 Registers of Data • 72
Slave ID • 54
Special Functions • 56
Start Here • 5
Starting the Data Analyzer • 76
Stop Bits • 54
Stopping the Data Analyzer • 76
Support, Service & Warranty • 97
T
The Configuration/Debug Menu • 65
Transferring the Configuration File from PC
to PTQ module • 69
Transferring the Configuration File from PTQ
module to PC • 69
Transferring the Configuration File to the
Module • 62
Transferring the Configuration File to Your
PC • 59
U
Uploading and Downloading the
Configuration File • 58
Use CTS Line • 54
Using the Configuration/Debug Port • 67
V
Verify Jumper Settings • 37
Verify Successful Download • 19