User manual

PTQ-104S Rev2 ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 35 of 195
February 22, 2013
4 In the CPU/Executive pane, use the scroll bar to locate and select the PLC to
configure.
5 Click OK. This action opens the PLC Configuration dialog box, populated with
the correct values that were selected for the PLC.
6 Make a note of the holding registers for the module. This information will be
needed when modifying the application. The Holding Registers are displayed
in the PLC Memory Partition pane of the PLC Configuration dialog box.