User manual

PTQ-104S Rev2 ♦ Quantum Platform Configuring the Processor with Concept
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 33 of 195
February 22, 2013
4 Choose the MDC file and help file for the version of Concept:
o Concept 2.6 users: select PTQ_2_60.mdc and PTQMDC.hlp
o Concept 2.5 users: select PTQ_2_50.mdc and PTQMDC.hlp.
Select the files that go with the Concept version being used, and then click
OK. This action opens the Add New Modules dialog box.
5 Click the ADD ALL button. A series of message boxes may appear during this
process. Click YES or OK for each message that appears.
6 When the process is complete, open the FILE menu and choose EXIT to save
the changes.
3.2 Creating a New Project
This phase of the setup procedure must be performed on a computer that has
the Concept configuration software installed.
1 From the computer, choose START / PROGRAMS / CONCEPT V2.6 XL.EN /
CONCEPT. This action opens the Concept window.