User manual

Configuring the Processor with Concept PTQ-104S Rev2 ♦ Quantum Platform
User Manual IEC 60870-5-104 Server for Quantum
Page 32 of 195 ProSoft Technology, Inc.
February 22, 2013
3.1 Information for Concept Version 2.6 Users
This guide uses Concept PLC Programming Software version 2.6 to configure
the Quantum PLC. The ProSoft Solutions DVD includes MDC module
configuration files that help document the PTQ installation. Although not required,
these files should be installed before proceeding to the next section.
3.1.1 Installing MDC Configuration Files
1 From a PC with Concept 2.6 installed, choose START / PROGRAMS / CONCEPT
/ MODCONNECT TOOL.
This action opens the Concept Module Installation dialog box.
2 Choose FILE / OPEN INSTALLATION FILE.
This action opens the Open Installation File dialog box:
3 If a Quantum processor is being used, the MDC files will be needed. In the
Open Installation File dialog box, navigate to the MDC Files directory on the
ProSoft Solutions DVD.