User manual

PTQ-104S Rev2 ♦ Quantum Platform Configuring the Processor with Unity Pro
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 25 of 195
February 22, 2013
3 Before you can save the project in Unity Pro, you must validate the
modifications. Open the EDIT menu, and then choose VALIDATE. If no errors
are reported, you can save the project.
4 SAVE the project.
2.3 Build the Project
Whenever you update the configuration of your PTQ module or the processor,
you must import the changed configuration from the module, and then build
(compile) the project before downloading it to the processor.
Note: The following steps show you how to build the project in Unity Pro. This is not intended to
provide detailed information on using Unity Pro, or debugging your programs. Refer to the
documentation for your processor and for Unity Pro for specialized information.
To build (compile) the project
1 Review the elements of the project in the Project Browser.
2 When you are satisfied that you are ready to download the project, open the
BUILD menu, and then choose REBUILD ALL PROJECT. This action builds
(compiles) the project into a form that the processor can use to execute the
instructions in the project file. This task may take several minutes, depending
on the complexity of the project and the resources available on your PC.
3 As the project is built, Unity Pro reports its process in a Progress dialog box,
with details appearing in a pane at the bottom of the window. The following
illustration shows the build process under way.
After the build process is completed successfully, the next step is to download
the compiled project to the processor.