User manual

Reference PTQ-104S Rev2 ♦ Quantum Platform
User Manual IEC 60870-5-104 Server for Quantum
Page 184 of 195 ProSoft Technology, Inc.
February 22, 2013
File transfer
(Station-specific parameter, mark "X" if function is used)
File transfer in monitor direction
 Transparent file
 Transmission of disturbance data of protection equipment
 Transmission of sequence of events
 Transmission of sequence of recorded analogue values
 File transfer in control direction
 Transparent file
Background scan
(Station-specific parameter, mark "X" if function is only used in the standard
direction, "R" if only used in the reverse direction, and "B" if used in both
directions)
 Background scan
Definition of time outs
Parameter
Default Value
Remarks
Selected Value
t
0
60 seconds
Time-out of connection establishment
60 seconds
t
1
15 seconds
Time-out of send or test APDUs
t
2
10 seconds
Time-out for acknowledges in case of no data
messages (t
2
< t
1
)
t
3
20 seconds
Time-out for sending test frames in case of a
long idle time
Maximum range of values for configurable time-outs: 1 to 255 seconds, accuracy
1 second. (t1, t2, and t3 only)
Maximum number of outstanding I format APDUs k and latest acknowledge
APDUs (w)
Parameter
Default Value
Remarks
Selected Value
k
12 APDUs
Maximum difference receive sequence number to
send state variable (Maximum value is 19)
w
8 APDUs
Latest acknowledge after receiving w I format
APDUs
Maximum range of values k: 1 to 32767 (2
15
-1) APDUs, accuracy 1 APDU
Maximum range of values w: 1 to 32767 (2
15
-1) APDUs, accuracy 1 APDU
(Recommendation: w should not exceed two-thirds of k).
Port number
Parameter
Value
Remarks
Port number
2404
In all cases