User manual

Start Here PTQ-104S Rev2 ♦ Quantum Platform
User Manual IEC 60870-5-104 Server for Quantum
Page 18 of 195 ProSoft Technology, Inc.
February 22, 2013
4 If you are still not able to establish a connection, contact ProSoft Technology
for assistance.
1.3.3 Ethernet Configuration
Use this procedure to configure the Ethernet settings for your module. You must
assign an IP address, subnet mask and module address. After you complete this
step and download the configuration to the module, you can connect to the
module with an Ethernet cable.
1 Determine the network settings for your module, with the help of your network
administrator if necessary. You will need the following information:
o IP address (fixed IP required) _____ . _____ . _____ . _____
o Subnet mask _____ . _____ . _____ . _____
o Gateway address _____ . _____ . _____ . _____
Note: The module Address is optional, and is not required for networks that do not use a default
module.
2 Double-click the ETHERNET CONFIGURATION icon.