User manual

PTQ-104S Rev2 ♦ Quantum Platform Start Here
IEC 60870-5-104 Server for Quantum User Manual
ProSoft Technology, Inc. Page 11 of 195
February 22, 2013
1 Start Here
In This Chapter
 Hardware and Software Requirements ................................................. 12
 Install ProSoft Configuration Builder Software ....................................... 13
 Setting Up the ProTalk Module .............................................................. 14
Note: The PTQ-104S Rev2 manual is intended for v2.07.000 and newer firmware. For v1.25.000
and older firmware, please use the PTQ-104S Rev1 manual.
Verifying the firmware of the PTQ-104S module can be found on page 119.
This guide is intended to guide you through the ProTalk module setup process,
from removing the module from the box to exchanging data with the processor. In
doing this, you will learn how to:
 Set up the processor environment for the PTQ module
 View how the PTQ module exchanges data with the processor
 Edit and download configuration files from your PC to the PTQ module
 Monitor the operation of the PTQ module