User manual
Configuring the Processor with Concept 2.6 PTQ-PDPMV1 ♦ Quantum Platform
User Manual PROFIBUS DP Master Network Interface Module for Quantum
Page 144 of 306 ProSoft Technology, Inc.
August 12, 2014
Description: The COLDBOOT function block allows you to remotely reboot the
module. To trigger a reboot of the module, change the value of the Cldboot bit
from OFF (zero) to ON (one). The bit is reset back to OFF when the function is
executed.
HSBY Note: This function block will reset both the local (active) Master and the remote
(passive) Master.