User manual

PTQ-PDPMV1 ♦ Quantum Platform Configuring the Processor with Concept 2.6
PROFIBUS DP Master Network Interface Module for Quantum User Manual
ProSoft Technology, Inc. Page 133 of 306
August 12, 2014
Example
If the Set Operating Mode mailbox function block is used as follows:
You can create a Reference Data Editor table with three trigger variables for the
Set Operating Mode mailbox. Start by moving a value of 1 to SetStop in order to
set the module’s mode to STOP.
At this point, you should notice the following LED display, indicating that the
module’s mode was changed to STOP:
LED
Status
MSTR STAT
RED
COM STAT
OFF
DBASE STAT
GREEN
TK HOLD
GREEN