User manual

49TPTQ-104C ♦ 48TQuantum Platform Downloading the PCB File to the Module
47TIEC 60870-5-104 Client
12TUser Manual
3 The program will scan the PC for a valid com port (this may take a few
seconds). When PCB has found a valid com port, the D
OWNLOAD dialog box
will open.
4 Choose the com port to use from the dropdown list, and then click
the D
OWNLOAD button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the D
OWNLOAD dialog
box will display the message Module Running.
6.2 Downloading the Project via Ethernet Connection
This procedure cannot be done unless the IP address has been initially
configured and downloaded serially (page 19) to the module. In the tree view in
ProSoft Configuration Builder, left-click once to select the PTQ-104C module.
ProSoft Technology, Inc. Page 77 of 136
March 4, 2013