Product specifications

11
Contents
Switch SW 1
Function Description Details
Datalink
Options
Host
PLC
Address
(when Global
Data Control
Enabled)
Allows the User to
select the level of
Datalink support the
1560-MBP unit will
have when talking to
the SCANport device.
Some devices do not
support Datalinks, in
which case the ‘No
Datalinks’ option must
be selected.
If the Global Data
Control is Enabled
(SW2-7 is set to 1)
then the 1560-MBP
must be told which
Host PLC Global
Database to get the
control values from.
To select the
appropriate Host,
determine the Host’s
Modbus Plus address
and select that
address using the dip
switches SW1- 1 to 6.
SW1-7 and 8
8 7
off off No Datalinks
off on Datalink A only
on off Datalink A&B only
on on Datalink A,B,C,D
SW1-1 to 6
1 Address Bit 0 Value = 1
2 Address Bit 1 Value = 2
3 Address Bit 2 Value = 4
4 Address Bit 3 Value = 8
5 Address Bit 4 Value = 16
6 Address Bit 5 Value = 32
Example Addresses = 1 to 64
6 5 4 3 2 1 Address
off off off off off off 1
off off off off off on 2
off off off off on off 3
off off off off on on 4
off off off on off off 5
off off off on off on 6
off off off on on off 7
off off off on on on 8
off off on off off off 9
off off on off off on 10
off off on off on off 11
off off on off on on 12
off off on on off off 13
off off on on off on 14
off off on on on off 15
off off on on on on 16
off on off off off off 17
off on off off off on 18
off on off off on off 19
off on off off on on 20
off on off on off off 21
off on off on off on 22
off on off on on off 23
off on off on on on 24
off on on off off off 25
off on on off off on 26
off on on off on off 27
Chapter 3 — Hardware Setup