User manual

MVI56-HART ♦ ControlLogix Platform Configuring the MVI56-HART Module
HART Multi-drop Master Communication Module User Manual
ProSoft Technology, Inc. Page 49 of 171
October 13, 2011
2.4 Downloading the Project to the Module Using a Serial COM Port
For the module to use the settings you configured, you must download (copy) the
updated Project file from your PC to the module.
To download the project file
1 In the tree view in ProSoft Configuration Builder, click once to select the module.
2 Right-click the module icon to open a shortcut menu. From the shortcut menu,
choose DOWNLOAD FROM PC TO DEVICE. The program will scan your PC for a valid
com port (this may take a few seconds). When PCB has found a valid COM port, the
Download dialog box will open.
3 Choose the COM port to use from the dropdown list, and then click the DOWNLOAD
button.
The module will perform a platform check to read and load its new settings. When the
platform check is complete, the status bar in the Download dialog box will display the
message Module Running.