User manual

MVI56-HART ♦ ControlLogix Platform Start Here
HART Multi-drop Master Communication Module User Manual
ProSoft Technology, Inc. Page 25 of 171
October 13, 2011
3 Click to select the driver, and then click CONFIGURE. This action opens the Configure
RS-232 DF1 Devices dialog box.
4 Click the AUTO-CONFIGURE button. RSLinx will attempt to configure your serial port to
work with the selected driver.
5 When you see the message Auto Configuration Successful, click the OK button to
dismiss the dialog box.
Note: If the auto-configuration procedure fails, verify that the cables are
connected correctly between the processor and the serial port on your computer,
and then try again. If you are still unable to auto-configure the port, refer to your
RSLinx documentation for further troubleshooting steps.