User manual

Start Here S3964R ♦ ProLinx Gateway
Driver Manual Siemens 3964R Protocol
ProSoft Technology, Inc. Page 11 of 64
April 14, 2009
1.2.2 Adding a Gateway
To add a gateway to your project:
1 Double-click the D
EFAULT MODULE icon to open the CHOOSE MODULE TYPE
dialog box.
2 On the C
HOOSE MODULE TYPE dialog box, select the gateway type.
Or
1 Open the P
ROJECT menu and choose LOCATION.
2 On the L
OCATION menu, choose ADD MODULE.
To add a gateway to a different location:
1 Right-click the L
OCATION folder and choose ADD MODULE. A new gateway
icon appears.
Or
1 Select the L
OCATION icon.
2 From the P
ROJECT menu, select LOCATION, then select ADD MODULE.