User manual

Publication LOGIX-AP010B-EN-P - May 2010 129
Other Communication Modules Appendix A
the I/O data transfer on the Profibus network. It supports all standardized
baud rates, up to 12 Mbps.
Siemens Industrial Ethernet/Modbus TCP/IP
This section describes modules that connects to a Siemens Industrial
Ethernet/Modbus network.
ProSoft ILX56-MM
The ProSoft Technology inRAx Message Manager is a single-slot solution that
connects and transfers factory and plant process-automation monitoring and
control data between islands of automation across diverse platforms, networks
and protocols.
The inRAx Message Manager is an easy-to-use data transfer engine for the
ControlLogix 1756 platform, supporting Rockwell Automation Programmable
Logic Controller (PLC) and Programmable Automation Controller (PAC)
network protocols, and platforms and devices that use Siemens Industrial
Ethernet and Modbus TCP/IP protocols.
MVI56-PDPMV1 Specifications
Specification Type Description
General
Single Slot-1756 backplane compatible.
The module is recognized as an Input/Output module and has
access to processor memory for data transfer between processor
and module.
Ladder Logic is used for data transfer between module and
processor. Sample ladder file (add-on instruction) included.
Local or remote rack.
Configurable I/O backplane sizes allow optimal performance for
remote rack applications.
CIPconnect (tm) enabled. Module supports communication with
ProSoft Configuration Builder and FDT comDTM via Ethernet
routing by using Rockwell Automation Ethernet interface.
Profibus DP Master
Up to 125 Slaves can be connected with a repeater.
Up to 1536 cyclic bytes input and 1536 bytes output data.
Supports Extended Diagnostic Data.
RS-485 optically isolated Profibus Interface with on board DC-DC
converter.
Acyclic communication (DPV1), Read and Write.
Alarm Handling (DPV1).
Supports Sync and Freeze commands.
Supports PROFIdrive 3.1 compliant parameter read and write
operations.
Supports Multicast and Broadcast telegrams (DPV1).