User manual

Preface
Publication LOGIX-AP010B-EN-P - May 2010 11
Additional Options
Additional options include the following:
• Application-level telephone support during the start-up and
debugging phase of the project.
• Consultation on system re-engineering, operator interface,
architecture and communication strategies, to take full advantage of
the new platform’s control capabilities that are not part of a code
translation effort, training, and onsite startup is available as an added
value from you local Global Sales and Solutions (GSS) office.
• Complete turn-key migration or upgrades are available from your
local GSS/Engineered Systems Office.
Additional Program Conversions Available
• PLC-2 format to ControlLogix, CompactLogix, PLC-5,
SLC500/MicroLogix format
• PLC-3 format to ControlLogix, CompactLogix, or PLC-5 format
• PLC-5/250 format to ControlLogix or CompactLogix format
• Modicon – Quantum, 984, 584, 380, 381, 480, 485, 780, 785 to
ControlLogix or CompactLogix format
• Siemens – S-5, S-7 to ControlLogix or CompactLogix format
• TI - 520, 520C, 525, 530, 530C, 535, 560, 560/565, 565, 560/560T,
560T, 545, 555, 575 to ControlLogix or CompactLogix format
• GE Series 6 to ControlLogix or CompactLogix format
Program conversions of other third-party programmable controllers to
Allen-Bradley controller programs are also available. Contact technical support
for details.
To schedule a conversion project, or learn more about the Program
Conversion Services, contact your local Rockwell Automation sales office or
authorized distributor: email us at [e-mail], or
visit http://www.rockwellautomation.com/support
and view KnowledgeBase
Document G19154.
IMPORTANT
Use consultation services for re-engineering, typically to
expand the system functionality and not to change out
hardware due to obsolete or related reasons. SLC to Logix
format and PLC-5 to Logix format conversions and PCE comment
generation are built into RSLogix 5000 software.