Specifications

Reference DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 70 of 124 ProSoft Technology, Inc.
July 24, 2013
5.1 Command Function Codes
In the following discussion, the Column values are described for the serial DFCM
Command list (See Node Address parameter #6). In the DFNT module, the Node
address has been replaced with two parameters; the IP Address and the Slot
Number, causing the Function Code and Function Parameters to occupy
positions 8 to 12 instead of 7 to 11. Aside from this difference, all other
information is correct.
DFNT Configuration Form
Module Information Data
Device Information Data
1
2
3
4
5
6
7
8
9
10
11
12
Enable
Code
Internal
Address
Poll
Interval
Time
Count
Swap
Code
IP
Address
Slot
Number
Function
Code
Function Parameters
DFNT Command Structure
Module Information Data
Device Information Data
Column #
1
2
3
4
5
6
7
8
9
10
11
12
Function
Code
Enable
Code
Internal
Address
Poll
Interval
Time
Count
Swap
Code
IP
Address
Slot
Number
Function
Code
Function Parameters