Specifications

Contents DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 6 of 124 ProSoft Technology, Inc.
July 24, 2013
3.6 Using the CommonNet Data Map ........................................................................... 44
3.6.1 Moving Data ............................................................................................................ 45
3.6.2 From Address ......................................................................................................... 45
3.6.3 To Address .............................................................................................................. 45
3.6.4 Register Count ........................................................................................................ 45
3.6.5 Swap Code ............................................................................................................. 45
3.6.6 Delay Preset ........................................................................................................... 47
3.7 Ethernet Port Configuration - wattcp.cfg ................................................................. 48
3.8 Downloading the Project to the Module Using a Serial COM port .......................... 49
4 Diagnostics and Troubleshooting 51
4.1 Using ProSoft Configuration Builder (PCB) for Diagnostics ................................... 52
4.1.1 Required Hardware ................................................................................................. 52
4.1.2 Using the Diagnostic Window in ProSoft Configuration Builder ............................. 52
4.1.3 Navigation ............................................................................................................... 54
4.2 Base Module LEDs ................................................................................................. 56
4.2.1 Ethernet LED Indicators .......................................................................................... 56
4.3 Client Error/Status Data .......................................................................................... 57
4.3.1 DFNT Client 0 Status .............................................................................................. 57
4.3.2 Unconnected Msg DFNT Client 0 Status ................................................................ 58
4.3.3 DFNT Client 1 through 4 Status.............................................................................. 58
4.3.4 DFNT Server 0 ........................................................................................................ 59
4.3.5 DFNT Servers 1 Through 4 .................................................................................... 59
4.3.6 DF1 Pass-Through Server ...................................................................................... 60
4.4 EtherNet/IP Client Command List Error Data ......................................................... 61
4.4.1 DFNT Client 0 (Command List Error Data) ............................................................. 61
4.4.2 DFNT Client 1 Through 4 Command List Error Addresses .................................... 61
4.5 Error Codes ............................................................................................................. 62
4.5.1 Local STS Error Codes ........................................................................................... 62
4.5.2 Remote STS Error Codes ....................................................................................... 63
4.5.3 Errors When EXT STS Is Present .......................................................................... 64
4.5.4 Module Specific Error (not DFNT Compliant) ......................................................... 65
4.6 TCP/IP Interface Errors .......................................................................................... 66
4.6.1 Timeout Errors ........................................................................................................ 66
4.6.2 Register Session Response Errors......................................................................... 66
4.6.3 Forward Open Response Errors ............................................................................. 66
4.6.4 PCCC Response Errors .......................................................................................... 67
5 Reference 69
5.1 Command Function Codes ..................................................................................... 70
5.2 General Command Structure .................................................................................. 71
5.2.1 Function Code #1 - Protected Write (Basic Command Set) ................................... 72
5.2.2 Function Code #2 - Unprotected Read (Basic Command Set) .............................. 72
5.2.3 Function Code #3 - Protected Bit Write (Basic Command Set) .............................. 73
5.2.4 Function Code #4 - Unprotected Bit Write (Basic Command Set) ......................... 73
5.2.5 Function Code #5 - Unprotected Write (Basic Command Set) ............................... 74
5.2.6 Function Code #100 - Word Range Write (PLC-5 Command) (Binary Address) ... 75
5.2.7 Function Code #101 - Word Range Read (PLC-5 Command) (Binary Address) ... 76
5.2.8 Function Code #102 - Read-Modify-Write (PLC-5 Command) (Binary Address) ... 77
5.2.9 Function Code #150 - Word Range Write (PLC-5 Command) (ASCII Address) .... 78
5.2.10 Function Code #151 - Word Range Read (PLC-5 Command) (ASCII Address) .... 78