Specifications

Reference DFNT ♦ ProLinx Gateway
Protocol Manual EtherNet/IP Explicit Messaging Client/Server
Page 116 of 124 ProSoft Technology, Inc.
July 24, 2013
Set the READ/WRITE parameter to READ. The module supports a TARGET DEVICE
parameter value of 500CPU or PLC5. In order to complete the configuration of
the MSG instruction, select the SETUP SCREEN area of the MSG object. This
displays the following dialog box.
The TARGET DEVICE DATA TABLE ADDRESS must be set to a valid file element
(such as, N11:0) for SLC and PLC5 messages. The MULTIHOP option must be
set to YES.
Fill in the MULTIHOP tab portion of the dialog box as shown in the following
illustration.
Set the IP address value to the module’s Ethernet IP address. You must press
the "Insert" key to add the second line for ControlLogix Backplane and set the
slot number to zero.