Specifications

DFNT ♦ ProLinx Gateway Reference
EtherNet/IP Explicit Messaging Client/Server Protocol Manual
ProSoft Technology, Inc. Page 101 of 124
July 24, 2013
Next select the NODE option from the EDIT MODE tab. After selecting the option,
the following dialog box is displayed:
Enter a record in the dialog box for the DFNT module to be addressed. The
NAME field identifies the module to the RSView system. The CHANNEL parameter
should be that defined in the channel set up defined above. The STATION
parameter should be set to the IP address of the DFNT module. Select the
CLOSE button after completing the node entry. If your version of the RSView
supports ControlLogix controller tag read and write operations, select the device
type consistent with the ControlLogix processor. This will permit direct access to
the controller tags simulated in the module. Use of controller tags simplifies
handling of the data in RSView as the data will be passing in the correct data
format (that is, bit, word, float).