Specifications

HART ♦ ProLinx Gateway Error/Status Data
HART Master Driver Manual
Page 44 of 119 ProSoft Technology, Inc.
July 7, 2009
Bit Code Description
3 0x0008 Invalid Preambles (1 to 50)
4 0x0010 Invalid Short Address Retries (0 to 50)
5 0x0020 Invalid Long Address Retries (0 to 50)
6 0x0040 Invalid Retries After Error (0 to 50)
7 0x0080 Invalid Poll Time After Error (0 to 10000)
8 0x0100 Invalid DB Address Status
9 0x0200 Invalid Command Count
10 0x0400 Memory Error in allocating commands
11 0x0800 Memory Error in allocating command fixed data
12 0x1000 Memory Error in allocating TX/RX buffers
13 0x2000 HART Board not found
14 0x4000 Cannot initialize HART channel
15 0x8000 reserved
4.4 Port 0 General Status Data
Status Register Description
10700 State
10701 Comm State
10702 Device Status (bit mapped)
10703 Device Poll List (bit mapped)
10704 Device With Long Address (bit mapped)
10705 Current Command
10706 Command Request Count
10707 Command Response Count
10708 Configuration Error Word
10709 Current Error Code
10710 Last Error Code
10711 to 10799 No Valid Data
4.5 Port 1 General Status Data
Status Register Description
10900 State
10901 Comm State
10902 Device Status (bit mapped)
10903 Device Poll List (bit mapped)
10904 Device With Long Address (bit mapped)
10905 Current Command
10906 Command Request Count
10907 Command Response Count