Specifications

Configure the Gateway HART ♦ ProLinx Gateway
Driver Manual HART Master
ProSoft Technology, Inc. Page 39 of 119
July 7, 2009
3.5 Data Map
The [DATA MAP] section allows you to copy data between areas in the module’s
internal database.
You can copy to 100 registers at a time, and you can configure up to 200
separate copy commands.
For example, you can copy data from the error or status tables in upper memory
to internal database registers in the User Data memory area.
You can also rearrange the byte and/or word order during the copy process so
that data such as floating-point values can be converted to the correct format for
a specific protocol.
You can also use the Data Map to condense widely dispersed data into one
contiguous data block, making it easier to access.