Specifications

Configure the Gateway HART ♦ ProLinx Gateway
Driver Manual HART Master
ProSoft Technology, Inc. Page 35 of 119
July 7, 2009
Command Definition
16 Read Final Assembly Number
17 Write Message
18 Write Tag Descriptor Date
19 Write Final Assembly Number
20 Read Long Tag
21 Read Unique Identifier Associated With Long Tag
22 Write Long Tag
HART Common Practice Commands Set
Command Definition
33 Read Transmitter Variables
34 Write Damping Value
35 Write Range Values
36 Set Upper Range Value
37 Set Lower Range Value
38 Reset Configuration Changed Flag
39 EEPROM Control
40 Enter Exit Fixed Current Mode
41 Perform Transmitter Self Test
42 Perform Master Reset
43 Set PV Zero
44 Write PV Units
45 Trim DAC Zero
46 Trim DAC Gain
47 Write Transfer Function
48 Read Additional Transmitter Status
49 Write PV Sensor Serial Number
50 Read Dynamic Variable Assignments
51 Write Dynamic Variable Assignments
52 Set Transmitter Variable Zero
53 Write Transmitter Variable Units
54 Read Transmitter Variable Information
55 Write Transmitter Variable Damping Value
56 Write Transmitter Variable Sensor Serial Number
57 Read Unit Tag Descriptor Date
58 Write Unit Tag Descriptor Date
59 Write Number Of Response Preambles
60 Read Analog Channel and Percent of Range
61 Read Dynamic Variables and PV Analog Ch
62 Read Analog Channels
63 Read Analog Channel Information