Specifications

HART ♦ ProLinx Gateway Configure the Gateway
HART Master Driver Manual
Page 28 of 119 ProSoft Technology, Inc.
July 7, 2009
3.2 Printing a Configuration File
To print a configuration file:
1 Select the M
ODULE icon, and then click the right mouse button to open a
shortcut menu.
2 On the shortcut menu, choose V
IEW CONFIGURATION. This action opens the
V
IEW CONFIGURATION window.
3 On the V
IEW CONFIGURATION window, open the FILE menu, and choose
P
RINT. This action opens the PRINT dialog box.
4 On the P
RINT dialog box, choose the printer to use from the dropdown list,
select printing options, and then click OK.
3.3 [HART PORT x]
The [HART PORT 0], [HART PORT 1], [HART PORT 2], [HART PORT 3] [HART
PORT 4], [HART PORT 5], [HART PORT 6] and [HART PORT 7] sections of the
configuration set the HART channel communication parameters, define the
protocol specifics and set the command list parameters. The parameters are the
same for all 8 sections. The command list for each HART channel is entered in a
different section in the file.
3.3.1 Enabled
Y or N
This parameter enables or disables the specific HART channel. If the parameter
is set to "Y", the channel will be utilized. If set to "N", the channel will not be used.