Specifications

HART ♦ ProLinx Gateway Functional Overview
HART Master Driver Manual
Page 14 of 119 ProSoft Technology, Inc.
July 7, 2009
Type Specifications
45 Trim Dac Zero
46 Trim Dac Gain
47 Write Transfer Function
48 Read Additional Transmitter Status
49 Write Pv Sensor Serial Number
50 Read Dynamic Variable Assignments
51 Write Dynamic Variable Assignments
52 Set Transmitter Variable Zero
53 Write Transmitter Variable Units
54 Read Transmitter Variable Information
55 Write Transmitter Variable Damping Value
56 Write Transmitter Variable Sensor Serial Number
57 Read Unit Tag Descriptor Date
58 Write Unit Tag Descriptor Date
59 Write Number Of Response Preambles
108 Write Burst Mode Command Number
109 Burst Mode Control
110 Read All Dynamic Variables
Command List
Up to 100 command per channel, each fully configurable for function,
slave address, register to/from addressing and word count for Floating
Point or Integer Data
Status Data
Error codes returned by the HART protocol available on an individual
command basis. In addition, a slave status list is maintained per active
channel.
Polling of command list
User configurable polling of commands, including disabled, continuous,
on change of data (write only) and dynamically user or automatic
enabled.
The ProLinx HART module supports version 5 of the HART protocol.