Specifications

Reference HART ♦ ProLinx Gateway
Driver Manual HART Master
ProSoft Technology, Inc. Page 103 of 119
July 7, 2009
5.4.3 Port 1 General Status Data
Status Register Name Description
10900 State Port 1 state machine value (used for debugging)
10901 Comm State
Port 1 communication state machine value (used for
debugging)
10902
Device Status (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in error. If the bit
is clear (0), the slave is not in error.
10903
Device Poll List (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in the poll list. If
the bit is clear (0), the slave is not in the poll list.
10904
Device With Long
Address (bit map)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave uses the long
address. If the bit is clear (0), the slave does not use
the long address.
10905 Current Command
This field contains the index of the current command to
execute.
10906
Command Request
Count
This field contains the total number of request
messages issued on the port.
10907
Command Response
Count
This field contains the total number of response
messages received from devices on the network.
10908
Configuration Error
Word
Configuration error word (see HART Configuration
Error Word (page
43))
10909 Current Error Code Current error code for port
10910 Last Error Code Last error code reported for port
10911
…
10999
No Valid Data
5.4.4 Port 1 Command Errors
Status Register Description
11000
…
11099
Command List Errors
5.4.5 Port 2 Data
Status Register Description
11100
…
11299
Same as above