Specifications

HART ♦ ProLinx Gateway Reference
HART Master Driver Manual
Page 102 of 119 ProSoft Technology, Inc.
July 7, 2009
5.4 HART Status Data Map
The word addresses in the following topics are virtual addresses. To view the
contents of these registers, use the Data Map section (page
39) of the module
configuration file to map these values into the 4000 word database.
5.4.1 Port 0 General Status Data
Status Register Name Description
10700 State Port 0 state machine value (used for debugging)
10701 Comm State
Port 0 communication state machine value (used for
debugging)
10702
Device Status (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in error. If the bit
is clear (0), the slave is not in error.
10703
Device Poll List (bit
mapped)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave is in the poll list. If
the bit is clear (0), the slave is not in the poll list.
10704
Device With Long
Address (bit map)
Each bit in this word corresponds to a slave address on
the network starting at bit 1 for slave address 1. Bit 0 is
not used. If the bit is set, the slave uses the long
address. If the bit is clear (0), the slave does not use
the long address.
10705 Current Command
This field contains the index of the current command to
execute.
10706
Command Request
Count
This field contains the total number of request
messages issued on the port.
10707
Command Response
Count
This field contains the total number of response
messages received from devices on the network.
10708
Configuration Error
Word
Configuration error word (see HART Configuration
Error Word (page
43))
10709 Current Error Code Current error code for port
10710 Last Error Code Last error code reported for port
10711
…
10799
No Valid Data
5.4.2 Port 0 Command Errors
Status Register Description
10800
…
10899
Command List Errors