User manual

Start Here ProLinx DNPS ♦ ProLinx Gateway
User Manual DNP 3.0 Slave
ProSoft Technology, Inc. Page 29 of 86
December 1, 2009
2 Open the P
ROJECT menu, and then choose MODULE / DOWNLOAD. The
program will scan your PC for a valid com port (this may take a few seconds).
When PCB has found a valid com port, the D
OWNLOAD dialog box will open.
3 Choose the com port to use from the dropdown list, and then click the
D
OWNLOAD button.
The module will perform a platform check to read and load its new settings.
When the platform check is complete, the status bar in the D
OWNLOAD dialog
box with the message "Module Running".