User's Manual

OS2400 Radio Module Exhibit 21: User Manual 3 FCC ID: OQ7OS2400
54
Glossary
Broadcast Point-Multipoint Network
This is network type where a single master radio sends data to every remote radio in the
network. This is done repeatedly until every remote receives and acknowledges the
data individually. Each remote sends pending data to the master which receives and
acknowledges data sent from each remote. There are multiple remotes for a single
master in this configuration.
Modbus Point-Multpoint Network
This is network with a single Master Radio and multiple Remotes. The devices cabled to
the radios communicate through the Modbus standard protocol. The Master sends data
to a Remote based on the Modbus address of the Modbus device. The data is only sent
to the one Remote device based on its address. Each Remote sends its data only to the
Master. The Master and Remotes acknowledge that the data was received correctly.
Peer to Peer Network
In a Peer-to-Peer network each radio has the ability to receive data from and transmit
data to any other radio in the network.
Point to Point Network
A network consisting of a single master and a single remote radio. All data from the
Master is received and acknowledged by the one Remote. All data from the one
Remote is received and acknowledged by the Master radio.
On-Line Help Options
For further information on the help system itself, merely type F1 after selecting the help
topics option to bring up information on the operation of the help system.