User's Manual

OS2400 Radio Module Exhibit 21: User Manual 3 FCC ID: OQ7OS2400
4
FCC Rules
FCC Compliance Statement
FCC RULES
The statements contained in this section “FCC RULES” are required. If the Locus, Inc.,
OverAir Solutions OS2400 radio is used as a component of any device, these
statements must be a component of that device’s product documentation.
FCC COMPLIANCE STATEMENT
The Locus, Inc., OverAir Solutions OS2400 device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
?? this device may not cause harmful interference, and
?? this device must accept any interference received, including interference that
may cause undesired operation.
WARNING
Changes or modifications to this radio module not expressly approved by its
manufacturer, Locus, Inc., could void the user’s authority to operate the equipment.
NOTE:
The Locus, Inc., OverAir Solutions OS2400 module is labeled with an FCC ID number.
If this label is not visible when installed in an end device, the outside of the device MUST
also display a label referring to the enclosed OS2400. Wording on the label similar to
the following should be used:
“Transmitter Module FCC ID: OQ7OS2400”
OR
“This device contains Transmitter Module FCC ID: OQ7OS2400.”
NOTE:
OEM integrators using this module in their final products must provide appropriate
information for end-users to comply with FCC RF exposure requirements, as indicated in
this manual. Separate FCC approval is required for products operating with a separation
distance of less than 20 cm between the antenna and persons.