User's Manual

OS2400 Radio Module Exhibit 21: User Manual 3 FCC ID: OQ7OS2400

Radio’s Address-an explanation

Note: It is suggested that the automatically set radio addresses not be changed. This is

an explanation to soothe the curious.

This Dialog box reflects the settings of a radio which is the Remote of a Point-to-Point

network.

In a Point-to-Point network this dialog box

reports both a Radio address and a

Destination address. The Destination Address

is the address of the radio to which the

selected radio will transmit all data.

By default:

?? Master is assigned to address 1

?? Remote is assigned to address 2

For the Master and Remote the Source and

Destination addresses are the inverse of each

other:

Master Remote

Address 1 2

Destination 2 1

If the addresses are to be manually changed,

this inverse relationship must be maintained.

This is the Radio Configuration Dialog box of a radio which is a component of a Point-

Multipoint network.

In a Point-Multipoint network, all Remote radios

communicate with the Master and the Master

communicates with all Remotes. The point-

multipoint configuration dialog does not have a

Destination Address field.