User manual

ILX34-AENWG ♦ Point I/O Platform About the Example Applications
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page67of209
September19,2011

3.5 Example 2 - Direct Connection
Inthisexample,aControlLogixcontrollercommunicateswithPOINTI/OmodulesviatheILX34‐
AENWGadapterusingadirectconnection.
Theadaptermakesadirectconnectiontoeachofthemodulesreferencedbythedata.

Attention: You must use series C POINT I/O modules with the ILX34-AENWG adapter. Series A
or B POINT I/O modules will not work with this adapter.

3.5.1 Add the Relay Output Module and Configure for Direct
Connection
1 Right‐clicktheILX34‐AENWGadapterundertheI/OConfigurationfolderandselectNEW
MODULE.

2 IntheSELECTMODULEdialogbox,choosethe1734‐OW2relayoutputmodulefromthelist,
andclickOK.

