User manual

About the Example Applications ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page66of209 ProSoftTechnology,Inc.
 September19,2011

3.4.5 View Module Data
YoucanviewmoduledataandcommunicationstatusinthecontrollertagsinRSLogix5000.The
followingillustrationshowstheILX34‐AENWGconfiguredwiththesampleapplication.
 POINT_IO_Adapter=thenameyougavetoyourEthernetadapter
 #=slotnumberofPOINTI/Omodule
 C=configuration,
I=input,O=output

Usethecontrollertagsinyourladderprogramtoreadinputdataorwriteoutputdata.
 SlotStatusBits:TheSlotStatusbitsdisplaytheconnectionstatusforeachofthePOINTI/O
modulesthatusearack‐optimizedconnection.
 Bit0isreservedfortheadapterand
alwaysreportsavalueof1.
 Eachoftheotherbits(1to63)correspondtoaPOINTI/Omodulethatyouinstallinthe
POINTI/Obackplane.
 Inthisexample,weconfiguredtheILX34‐AENWGadapterforbothrack‐optimizedanddirect
connections.
 Theslotstatusbits
indicatethatthemoduleinslot2isoperatingcorrectly:
o 0=moduleparticipatingwithnoerrorsand
o 1=modulenotparticipatingorconnectionerror(typically,moduleremoved/missing)
