User manual

ILX34-AENWG ♦ Point I/O Platform About the Example Applications
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page59of209
September19,2011

4 ClicktheC
ONNECTIONtab,andthenchangetheRPIvalueforthemodulefrom20(thedefault)
to50(therecommendedvalueforanalogorspecialtymodules).Thisvaluedetermineshow
oftentoexchangedatawiththeILX34‐AENWGadapter.

Important: To avoid overloading the ILX34-AENWG adapter, we recommend that RPI be no less
than 10 ms for rack connections and 50 ms for direct connections.
5 ClickOKsavetheconfiguration.
ThefollowingillustrationshowstheI/OConfigurationforthisproject.

