User manual

ILX34-AENWG ♦ Point I/O Platform About the Example Applications
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page57of209
September19,2011

3.4 Example 1 - Direct Connection and Rack Optimization
ThisexampleconfiguresyourILX34‐AENWGforbothdirectconnectionandrackoptimization
usingRSLogix5000software.
YoucanmixcommunicationformatsfordifferentI/Omodulescommunicatingthroughthesame
adapter.
 I/OmodulessetuptouserackoptimizationcommunicateattherateoftheRPIconfigured
fortheILX34
‐AENWGadapter.
 I/OmodulesconfiguredfordirectcommunicationcommunicateattheirownsetRPIand
ignoretheILX34‐AENWGadapterRPI.
Attention: You must use series C POINT I/O modules with the ILX34-AENWG adapter. Series A
or B POINT I/O modules will not work with this adapter.

3.4.1 Add the Relay Output Module and Configure for Direct
Connection
1 Right‐clicktheILX34‐AENWGadapterundertheI/OConfigurationfolderandselectNEW
MODULE.

2 IntheSELECTMODULEdialogbox,choosethe1734‐OW2relayoutputmodulefromthelist,
andclickOK.

