User manual

ILX34-AENWG ♦ Point I/O Platform About the Example Applications
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page53of209
September19,2011

3 About the Example Applications
In This Chapter
 SupportofRack‐optimizedandDirectConnections ..........................................54
 SystemComponents..........................................................................................55
 SetUptheHardware.........................................................................................56
 Example1‐DirectConnectionandRackOptimization.....................................57
 Example2‐DirectConnection..........................................................................67

Thefollowingtopicsdescribetwoexampleapplicationsthatdemonstratetheproceduresfor
configuringandcommunicatingwithPOINTI/OmodulesusingtheILX34‐AENWGadapter.Use
theseexampleapplicationsasbuildingblockstohelpyougetyourownsystemupandrunning.
Werecommendthatyousetupandrunthe
exampleapplicationsandusethemasguides.
Thefollowingillustrationshowsthetypeofsystemyouwillbesettingup.

Note: During the installation, you must connect to the ILX34-AENWG directly via Ethernet to set its
wireless settings so it can communicate with its Access Point. To prevent a loop from occurring,
avoid connecting Ethernet cables to the Access Point and the ILX34-AENWG at the same time
after the wireless link is established.
