User manual

Configure the ILX34-AENWG ILX34-AENWG ♦ Point I/O Platform
User Manual Wireless POINT I/O Adapter

Page44of209 ProSoftTechnology,Inc.
 September19,2011

2.4 Add POINT Modules Under the Adapter
1 Right‐clicktheILX34‐AENWGadapterunderI/Oconfigurationtoaddanewmodule.
Yoursecondmoduleisinslot1.
2 Selectthemodulefromthe
MODULETYPElist,andclickOK.
3 Inthe
MODULEPROPERTIESdialog,enterthefollowinginformation:
a) Name
b) Slot
4 ClicktheC
ONNECTIONtab,andsettheRPI:
o Fordigitalmodules,enter10ms
o Foranalogorspecialtymodules,enter50ms.
5 ClickF
INISH.
RepeatthesestepstoaddallofthePOINTI/OmodulesconnectedtotheILX34‐AENWG
adapter.
