User manual

ILX34-AENWG ♦ Point I/O Platform Configure the ILX34-AENWG
Wireless POINT I/O Adapter User Manual

ProSoftTechnology,Inc. Page39of209
September19,2011

2.2 Create the Network
1 Right‐clickI/OCONFIGURATIONandchooseNEWMODULE…

2 ExpandtheCOMMUNICATIONSnode,andthenselecttheETHERNETBRIDGEmodulethatmatches
yourhardware.Thisexampleusesa1756‐ENBT/Amodule.

Note: If you are prompted to "Select Major Revision", choose the lower of the available revision
numbers.